Diff Drop Kit Nissan Y62 Patrol - Front 25mm

MDK Front Differential Drop Kit Nissan Y62 Patrol 2012-On

Front 25mm

Introducing MDK Engineering, Products that have been designed and tested for the Y62 platform exclusive to The 4wd Shed.

At The 4wd Shed we are excited to work with MDK engineering, a company that shares our passion for 4wding and bringing innovative products to market, solving the many problems and cost associated with modifying the Y62 suspension.

All MDK products have designed in CAD by qualified BEng Mech SA & IAME engineers and meet ADR design requirements and are road legal under VSB14. Manufacturing locally allows prototypes to be tested and tweaked in the real world then thoroughly tested both on and off road to ensure both fit and performance. Our local manufacturing also allows lead times to be reduced and customisation.

Our Y62 Patrol Front Diff drop kit drops the diff 25mm. It is important to reduce the CV angle when raising the Y62s to avoid damage when out wheeling. Once you have fitted the MDK diff drop kit, you will reduce the stress/angles your CVs go under once lifted, resulting in less damage to your 4WD.

Kit Includes:

• 4 x Spacer Plates
• 4 x Studs
• 8 x Washers
• 6 x Nuts
• 2 x M14x120 Fine Bolt

Suitable for all lifts above 40mm, including vehicles with Coil Lifts & Lower Control Arm lifts fitted. Easily installed this kit is a bolt in bolt out kit, so easily removed if required. No modification to the vehicle needed when fitting. This kit is Made, Designed & Tested here locally in Victoria.

Will suit all Y62 S1-S5 models.

Installation time is approx 1hr. Allow extra time if bash plates are fitted & spacing may be required. Washers for spacing are NOT included.

All MDK products can be fitted in our Bayswater, Vic workshop. Call us for a quote on 03 9720 8783.

The 4WD Shed is an Authorised Stockist of MDK Engineering.