Ford Ranger PX Dual Cab 3.2L CRD NON-DPF 3 inch Exhaust Without Cat, Hotdog
More infoMake 4 interest-free payments of $405.80
Ford Ranger PX Dual Cab 3.2L CRD NON-DPF 3 inch Exhaust Without Cat, Hotdog
Ford Ranger PX Dual Cab NON-DPF 10/2011-2016 will also suit NON-DPF PX2 Models
Complete “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)
Everyone would agree, the Ranger could do with a little more poke!
Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.
Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2-year warranty, or stainless steel, which carries a 10-year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!
Configuration:
Quiet options in this exhaust system include an 8″ round, straight through sports muffler for effective noise reduction without compromising flow and performance.
Medium options have a small 4″ round hotdog resonator, for an aggressive sounding exhaust note.
Our twin tip exit option is fantastic for those wanting to make a visual statement with their exhaust system with a bold chrome twin side exit tip that really stands out.
Australia’s largest range of Performance Exhausts
The team at Manta combines more than 90 years of experience in the performance exhaust industry, engineering and developing Australia’s leading performance exhaust systems. We manufacture and wholesale a range of exhausts that boast a distinctive sound and perfect fitment. We strive to be industry leaders in bringing new systems to market.
Our performance exhaust range is the biggest in Australia, covering many makes and models of 4WDs, from Toyota Landcruisers through to the Volkswagen Amarok. Based in Perth and Melbourne, our systems are developed and produced in Australia. From here, we make our performance exhausts available in Sydney, Brisbane and other regions in Australia.
For improved performance or enhanced sound, Manta Performance Exhaust Systems are the ideal choice for automotive enthusiasts seeking the very best exhaust technology.
- System Type: Full System single tip
- Material: Stainless Steel
- Pipe Sizes: 3in Without Cat
- Noise Level: Medium
- Configuration: Full System single tip
Please Note: Though we like to keep the popular movers in stock, we may need to order in kits as required. You can always contact us before purchase to check availability.
The 4WD Shed can supply & fit your exhaust system in our Bayswater, Vic workshop. Please contact the team for a detailed quote on 03 9720 8783.
Shipping Note: Flat Rate Shipping covers most metro areas in Australia. However, extra freight charges may apply if residential or in a remote or regional area. Commercial business address is preferred. We will contact you to advise if this applies to your order.
Why choose a Manta Performance Exhaust System?
1. Extensive Range of Exhausts, Tuning & Accessories to fit Australian spec Vehicles
- Manta has built up an incredible catalogue of exhaust systems to fit popular vehicle makes, models and series
- Manta provide a vast array of exhaust system options, providing Aluminised Steel, Stainless Steel, multiple piping sizes, multiple sound options, different mufflers, hot dogs, catalytic converters, extractors and exhaust tips
2. High Quality Australian Made Exhausts that Actually Fit
- Our factory uses world class machinery, lean manufacturing methods and employs a Total Quality Management System to ensure consistency of product manufacturing
- MPI and Manta invest over 100 hours in Research, Development and Dyno testing for each popular performance or 4WD vehicle exhaust system
- Our exhaust systems are developed to sound tough, maximise flow and improve vehicle performance and economy
- Through extensive development testing, we perfect our exhaust fitment to give hassle free installations
MPI Automotive and Manta Exhausts have a 45 year history of exhaust system manufacturing and distribution.
(SSMKFD0247)
| SKU | SSMKFD0247 |
| Brand | Manta Performance Exhaust Systems |
| Shipping Weight | 35.0000kg |
More From This Category
Ford Ranger PX Dual Cab 3.2L CRD NON-DPF 3 inch Exhaust Without Cat, Hotdog Twin Tip Side Exit
Now $1,694.66
Ford Ranger PX Dual Cab 3.2L CRD NON-DPF 3 inch Exhaust With Cat Hotdog Twin Tip Side Exit
Now $1,937.67
