Ford Ranger PX2 PX3 Dual Cab 3.2L CRD DPF 3 inch Exhaust DPF Back
More infoFord Ranger PX2 PX3 Dual Cab 3.2L CRD DPF 3 inch Exhaust DPF Back
Ford Ranger PX2 PX3 Dual Cab DPF 2016-2022
Complete DPF-back or “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminium or stainless steel tubing (turbo back for offroad or race use only)
Everyone would agree, the Ranger could do with a little more poke!
Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.
Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2-year warranty, or stainless steel, which carries a 10-year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!
To take advantage of the upgraded exhaust system, we’re also pleased to offer the Sting ECU Remap for the PX Ranger. This allows for a whole host of parameters to be adjusted, delivering up to 20% improvement in horsepower and torque, and 10% improvement in the fuel economy – far better results than any plug-in chip. This tuning process is done completely in house, allowing the ECU remap to be custom written to suit your requirements. The size of the turbo on the PXII Ranger is a recognised limitation for gaining maximum performance from these vehicles, therefore the PX1 is able to obtain greater performance gains.
Configuration:
Quiet options in this exhaust system include an 8″ round, straight through sports muffler for effective noise reduction without compromising flow and performance.
Medium options have a small 4″ round hotdog resonator, for an aggressive sounding exhaust note.
DPF back systems also have the small 4″ round hotdog resonator, for a small increase over the factory noise level. However the DPF does have a large impact on the exhaust note, so large mufflers are not required.
Our twin tip exit option is fantastic for those wanting to make a visual statement with their exhaust system with a bold chrome twin side exit tip that really stands out.
DPF Back or Turbo Back?
The latest model Ranger comes from the factory with a Diesel Particulate Filter. These are an emissions device designed to control the amount of soot emitted from the exhaust system. We have two options in our exhaust range – DPF back (similar to a “cat back” system on a petrol vehicle), or turbo back (replacing the entire factory exhaust system, including the DPF).
The turbo back system does require a recalibration of the vehicle’s Engine Control Unit (ECU) to remove certain functions associated with the DPF system. This is intended for off-road or race use only.
In the future, we plan to introduce a high flow DPF system which will give you the benefits of a performance exhaust system while ensuring compliance with road rules
Australia’s largest range of Performance Exhausts
The team at Manta combines more than 90 years of experience in the performance exhaust industry, engineering and developing Australia’s leading performance exhaust systems. We manufacture and wholesale a range of exhausts that boast a distinctive sound and perfect fitment. We strive to be industry leaders in bringing new systems to market.
Our performance exhaust range is the biggest in Australia, covering many makes and models of 4WDs, from Toyota Landcruisers through to the Volkswagen Amarok. Based in Perth and Melbourne, our systems are developed and produced in Australia. From here, we make our performance exhausts available in Sydney, Brisbane and other regions in Australia.
For improved performance or enhanced sound, Manta Performance Exhaust Systems are the ideal choice for automotive enthusiasts seeking the very best exhaust technology.
- System Type: DPF BACK
- Material: STAINLESS STEEL
- Pipe Sizes: 3IN SINGLE TIP
- Noise Level: QUIET
- Configuration: DPF BACK – WITH SINGLE TIP
Please Note: Though we like to keep the popular movers in stock, we may need to order in kits as required. You can always contact us before purchase to check availability.
The 4WD Shed can supply & fit your exhaust system in our Bayswater, Vic workshop. Please contact the team for a detailed quote on 03 9720 8783.
Shipping Note: Flat Rate Shipping covers most metro areas in Australia. However, extra freight charges may apply if residential or in a remote or regional area. Commercial business address is preferred. We will contact you to advise if this applies to your order.
Why choose a Manta Performance Exhaust System?
1. Extensive Range of Exhausts, Tuning & Accessories to fit Australian spec Vehicles
- Manta has built up an incredible catalogue of exhaust systems to fit popular vehicle makes, models and series
- Manta provide a vast array of exhaust system options, providing Aluminised Steel, Stainless Steel, multiple piping sizes, multiple sound options, different mufflers, hot dogs, catalytic converters, extractors and exhaust tips
2. High Quality Australian Made Exhausts that Actually Fit
- Our factory uses world class machinery, lean manufacturing methods and employs a Total Quality Management System to ensure consistency of product manufacturing
- MPI and Manta invest over 100 hours in Research, Development and Dyno testing for each popular performance or 4WD vehicle exhaust system
- Our exhaust systems are developed to sound tough, maximise flow and improve vehicle performance and economy
- Through extensive development testing, we perfect our exhaust fitment to give hassle free installations
MPI Automotive and Manta Exhausts have a 45 year history of exhaust system manufacturing and distribution.
(SSMKFD0252)
| SKU | SSMKFD0252 |
| Brand | Manta Performance Exhaust Systems |
| Shipping Weight | 35.0000kg |
