LOCTITE 518 Pen - Gasketing Product Medium Strength 25ml
LOCTITE 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.
LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
- Semi-flexible, medium-strength anaerobic flange gasket
- For active and inactive rigid metal flanges
- Cures through minor surface contamination
- Adapts to flange surface irregularities and gaps up to 0.25 mm
- Gel-type consistency
- Seals instantly against low pressure
- Reduces inventory costs – no need for large inventory of cut gaskets
- Resists high pressure when fully cured
- No compression set or misaligned gaskets
- Easy to automate
- Reduces process costs – eliminates manual assembly of conventional gaskets
- NSF P1 Reg. No. 123758
Any gasket shape, any time. LOCTITE® gasketing products offer precise, reliable sealing. These gasketing materials include products with excellent fluid resistance and formulations for high operating temperatures, high torque retention and sensor-safe characteristics. A leader in form-in-place gasket makers, gasket dressings and general-purpose sealants, Henkel offers a choice of LOCTITE anaerobic, RTV silicone or solvent-based products to meet a broad range of complex automotive gasketing and sealing needs.
Technical Information
Application method | Dispense System, Manual |
Applications | Rigid Assembly Gasketing, Sealing |
Chemical basis / base | Dimethacrylate Ester |
Colour | Red |
Cure type | Anaerobic Cure |
Fixture time, Steel | 25.0 min. |
Gap fill, Unprimed | 0.25 mm |
Key characteristics | Fluorescent, For machined, rigid flanges, Immediate Low Pressure Sealing, Strength: Medium Strength, Surface Contamination-Tolerant, Thixotropic |
Number of components | 1 Part |
Operating temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
Physical form | Gel |
Recommended for use with | Aluminium, Metal: Iron - Cast Iron, Metal: Passive Metal, Metal: Steel |
Specific gravity, @ 25.0 °C | 1.1 |
Storage temperature | 8.0 - 21.0 °C |
Viscosity | 750000.0 mPa·s (cP) |
(2450583)
SKU | 2450583 |
Brand | Loctite |
Shipping Weight | 0.0800kg |