Volkswagen Amarok TDI550 TDI580 2H V6 3.0l 3 Inch Exhaust DPF BACK Extended Tailpipe
More infoMake 4 interest-free payments of $305.01
Volkswagen Amarok TDI550 TDI580 2H V6 3.0l 3 Inch Exhaust DPF BACK Extended Tailpipe
Volkswagen Amarok TDI550, TDI580 2H V6 3.0l Turbo Ute
The V6 Amarok exhaust system is a complete Manta exhaust system – available as a dump pipe back or DPF back system, in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of a short “Dump at diff” style exit, or extended tailpipe out the rear, and in medium or loud noise levels.
The VW Amarok is a popular 4×4, and the 3.0L V6 diesel engine released in 2016 made a good ute even better! Many Amarok drivers are looking for ways to improve the power, sound, and fuel economy of their V6 Amarok, and we have the perfect package.
As a supplier of the V6 Amarok exhaust, from either the factory DPF or for off-road and race applications we can replace the DPF with with a straight through race pipe. This still includes provision for all of the factory DPF temperature sensors. We have the optaion of either a straight-through muffler which gives a nice V6 rumble without being too intrusive inside the cabin (medium noise level), or for maximum noise we can run no mufflers at all (loud noise level)! All DPF back systems are a pipe-only setup, but are still listed as “quiet” as the factory DPF does shut down a lot of the exhaust noise.
We can then flash the Engine Control Unit (ECU) with a performance tune, which significantly improves the drive-ability of the vehicle, as well as the power and torque – please note an ECU remap is compulsory for all dump pipe back applications. With the exhaust and ECU tune combined, we are seeing the power outputs of the Amarok lift by anything from 20 – 40%. The real bonus, is all the extra power doesn’t come at the expense of fuel economy. Fuel consumption normally decreases, as the engine is operating at a higher efficiency.
Australia’s largest range of Performance Exhausts
The team at Manta combines more than 90 years of experience in the performance exhaust industry, engineering and developing Australia’s leading performance exhaust systems. We manufacture and wholesale a range of exhausts that boast a distinctive sound and perfect fitment. We strive to be industry leaders in bringing new systems to market.
Our performance exhaust range is the biggest in Australia, covering many makes and models of 4WDs, from Toyota Landcruisers through to the Volkswagen Amarok. Based in Perth and Melbourne, our systems are developed and produced in Australia. From here, we make our performance exhausts available in Sydney, Brisbane and other regions in Australia.
For improved performance or enhanced sound, Manta Performance Exhaust Systems are the ideal choice for automotive enthusiasts seeking the very best exhaust technology.
- System Type:
- Material: Stainless Steel
- Pipe Sizes: 3IN SINGLE
- Noise Level: QUIET
- Configuration: DPF back - extended tailpipe
Please Note: Though we like to keep the popular movers in stock, we may need to order in kits as required. You can always contact us before purchase to check availability.
The 4WD Shed can supply & fit your exhaust system in our Bayswater, Vic workshop. Please contact the team for a detailed quote on 03 9720 8783.
Shipping Note: Flat Rate Shipping covers most metro areas in Australia. However, extra freight charges may apply if residential or in a remote or regional area. Commercial business address is preferred. We will contact you to advise if this applies to your order.
Why choose a Manta Performance Exhaust System?
1. Extensive Range of Exhausts, Tuning & Accessories to fit Australian spec Vehicles
- Manta has built up an incredible catalogue of exhaust systems to fit popular vehicle makes, models and series
- Manta provide a vast array of exhaust system options, providing Aluminised Steel, Stainless Steel, multiple piping sizes, multiple sound options, different mufflers, hot dogs, catalytic converters, extractors and exhaust tips
2. High Quality Australian Made Exhausts that Actually Fit
- Our factory uses world class machinery, lean manufacturing methods and employs a Total Quality Management System to ensure consistency of product manufacturing
- MPI and Manta invest over 100 hours in Research, Development and Dyno testing for each popular performance or 4WD vehicle exhaust system
- Our exhaust systems are developed to sound tough, maximise flow and improve vehicle performance and economy
- Through extensive development testing, we perfect our exhaust fitment to give hassle free installations
MPI Automotive and Manta Exhausts have a 45 year history of exhaust system manufacturing and distribution.
(SSMKVW0010)
| SKU | SSMKVW0010 |
| Brand | Manta Performance Exhaust Systems |
| Shipping Weight | 35.0000kg |
More From This Category
