Adjustable Panhard Rod with Polyurethane Bushing - Rear - 100 Series IFS Toyota Landcruiser

Adjustable Panhard Rod - Rear with Polyurethane Bushings

Suits

• Toyota Landcruiser 100 Series IFS

Roadsafe Adjustable Panhard Rods are now available with Polyurethane bushings. Some customers prefer the longevity of the poly for these panhard applications. Many advantages can be found in urethane, over rubber. In the panhard application the poly bushings offer for greater load deflection, higher load bearing capacity, low compression set & greater tear strength.

An absolute necessity on all raised 4WDs is the Adjustable Panhard Rod. Designed to correct axle alignment, the fitment of an Adjustable Panhard rod eliminates potential contact between tyre & body & improves handling issues on vehicles lifted 2" & above.

All Roadsafe Adjustable Panhard Rods are heavy duty, single thread off car adjustable & come complete with bushings & steering damper mounting brackets where applicable.

Roadsafe Urethane bushings are the same dimensions as the factory original, so all rods are manufactured to factory bush specifications. Bushing replacement if required is easy, just use the factory original or aftermarket.

Design changes over time have seen the implementation of double nuts for extra security, 150mm of adjustment to suit 2-6" lifts & fine 2.0mm pitch thread for finer adjustability.
Roadsafe 4WDs Adjustable Panhard Rods are one of the few on the market that are manufactured from solid bar as standard, as well as boasting an increase in the outside diameter. It's only a matter of time for any vehicle that is used for serious off-road work that the factory panhard will break or bend. This will cause the body of the vehicle to move uncontrolled off centre to the chassis, damaging fuel filler lines, steering linkages & much more!

The 4WD Shed is an Authorised Stockist of Roadsafe 4WD.