Rear Standard Recovery Tow Hitch without Bow Shackle

Rear Standard Recovery Tow Hitch without Bow Shackle

Roadsafe offer a Heavy Duty Rear Recovery Tow Hitch featuring Twin Mounting Holes for either vertical or horizontal mounting depending on recovery angle.

Destruction tested to WLL5000kgs, and designed to suit a HEAVY-DUTY tow bar with 50x50mm (AS4177.1) tow hitch (please ensure towing system is rated and designed for this application).

The Recovery Hitch itself is rated to WLL5000kgs, and is recommended for use with a 4750kgs Bow Shackle. RTH001 are a solid steel, black e-coating.

This is for the Tow Hitch Only. See here if you want the Tow Hitch & Bow Shackle kit

The 4WD Shed is an Authorised Roadsafe 4wd Stockist

Always INSPECT the Tow Points and shackles before each use. Do not use if there are visible signs of damage or wear (including cracking or elongation). Do not exceed the Working Load Limit (WLL) of the shackle or Tow Points. Always STAY A SAFE DISTANCE away from the recovery area – at least 1.5 times the length of the recovery strap. Incorrect use of recovery equipment can result in serious injury or death.

Always ensure that adequate PREPARATION for the recovery, to minimise the strain on either vehicle, has been undertaken i.e. Digging, Rock placement etc. If you do not understand how to use this equipment safely or are uncomfortable with your abilities in the use of recovery equipment, please complete a course that specialises in four wheel driving & 4WD vehicle recovery.