Seat Adapter Kit 100/105 Series Toyota Landcruiser
suit BA BF FG FGX Falcon & VE Commodore Seats
Seat Adapter Kit to suit 100/105 Series Toyota Landcruiser
The Huracan Fabrication Seat Adaptor Kit to suit 100/105 Series Toyota Landcruiser is compatible with any BA, BF, FG or FGX Ford Falcon seat or VE Holden Commodore (will not suit the VF) seat.
The 100/105 Series kit will do both the front seats. You will receive custom fabricated and reinforced sliders with 5mm laser cut structural steel adapter brackets that directly interface the Ford or Holden seat (minus its rails) with the 100/105 series floor pan. Any electrics included in the Ford/Holden rails will be removed as part of this mod so there is no wiring required.
The kit comes with everything you need to directly bolt in front seats, right down to the last nut and bolt along with step by step instructions. Minimum seat height is approximately 30 mm LOWER than factory, an optional spacer is available to bring it back up to factory height, please select this at checkout. Extra charge applies
Maximum legroom is extended by a whopping 50 mm!
No cutting, drilling, welding or grinding required. This kit is 100% bolt in.
The 4WD Shed can supply & fit all our products. Need seats? Give us a call, we can get in seats by request. Not local? We suggest sourcing your seats from Ebay, Gumtree, Facebook or at your local wreckers.
Please note: By purchasing this kit you accept all responsibility for the modification made to your car. We can only endorse this kit for off-road/private use until you have had it approved by your local roads authority or automotive engineer. Seats shown in the ad are for demonstrations purposes only and are not included in the sale.
FAQ
Do I need to get a mod plate?
Yes. Any seat swap for a vehicle that did not ship with a particular seat from factory will require a mod plate.We advise speaking with your local engineer prior to purchasing to ensure they can sign off on this modification for you. We can assist you with this if you are local to us.
Shipping & Availability
Most kits are sent out next business day after ordering. Some kits however, such as tailgate storage mods and 100 series/GU Patrol require significant preparation and can be a couple days or even up to a week before being shipped. If time is critical please contact us for an accurate shipping estimate.
Warranty on my items.
We guarantee the structural integrity of the steel used in our seat adapter kits for the life of the vehicle. For other items, such as tailgate storage and bush armour we provide a 24 months warranty against manufacturing defects EG. defective rivets, welds or laminating etc.
The Ford/Holden seat I purchased came with electric rails. Do I need to wire these in?
No, any electrics in the rails will be removed as a part of this modification so there is no need to wire them in. The only exception is for premium model seats such as some FPV/HSV or Luxury models where lumbar support and back rest angle are electric. If you purchase these seats you will need to wire them up yourself.
(100LC-HF)
Seat Adapter Kit to suit 100/105 Series Toyota Landcruiser
The Huracan Fabrication Seat Adaptor Kit to suit 100/105 Series Toyota Landcruiser is compatible with any BA, BF, FG or FGX Ford Falcon seat or VE/VF Holden Commodore seat - just select which adaptor kit you require to suit the seats you plan on fitting.
You will receive custom fabricated and reinforced sliders with 5mm laser cut structural steel adapter brackets that directly interface the Ford or Holden seat (minus its rails) with the 100/105 series floor pan. Any electrics included in the Ford/Holden rails will be removed as part of this mod so there is no wiring required.
The kit comes with everything you need to directly bolt in both front seats, right down to the last nut and bolt along with step by step instructions. Minimum seat height is approximately 30 mm LOWER than factory, an optional spacer is available to bring it back up to factory height, please select this at checkout. Maximum legroom is extended by a whopping 50 mm!
No cutting, drilling, welding or grinding required. This kit is 100% bolt in.
The 4WD Shed can supply & fit all our products. Need seats? Give us a call, we can get in seats by request. Not local? We suggest sourcing your seats from Ebay, Gumtree, Facebook or at your local wreckers.
Please note: By purchasing this kit you accept all responsibility for the modification made to your car. We can only endorse this kit for off-road/private use until you have had it approved by your local roads authority or automotive engineer. Seats shown in the ad are for demonstrations purposes only and are not included in the sale.
FAQ
Do I need to get a mod plate?
Yes. Any seat swap for a vehicle that did not ship with a particular seat from factory will require a mod plate.We advise speaking with your local engineer prior to purchasing to ensure they can sign off on this modification for you. We can assist you with this if you are local to us.
Shipping & Availabilty
Most kits are sent out next business day after ordering. Some kits however, such as tailgate storage mods and 100 series/GU Patrol require significant preparation and can be a couple days or even up to a week before being shipped. If time is critical please contact us for an accurate shipping estimate.
Warranty on my items.
We guarantee the structural integrity of the steel used in our seat adapter kits for the life of the vehicle. For other items, such as tailgate storage and bush armour we provide a 24 months warranty against manufacturing defects EG. defective rivets, welds or laminating etc.
The Ford/Holden seat I purchased came with electric rails. Do I need to wire these in?
No, any electrics in the rails will be removed as a part of this modification so there is no need to wire them in. The only exception is for premium model seats such as some FPV/HSV or Luxury models where lumbar support and back rest angle are electric. If you purchase these seats you will need to wire them up yourself.
| SKU | 100LC-HF |
| Brand | Huracan Fabrication |
| Shipping Weight | 3.0000kg |
