Sway Bar Relocation Plates Toyota Hilux KUN

Front Sway Bar Relocation Plates - Toyota Hilux KUN 2005-2015

76mm HOLE C/C - 16.5mm Relocation

Please Note: Some KUN may require rad support to be notched or spaced for clearance to swaybar.

*Will also fit 120 Series Prado with the 76mm spacing

When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.

If your sway bar is out of alignment then handling can be affected & this great little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.

Please Note: Prado 120 Series have a build variation in regard to the front sway bar bracket hole spacing. There is no link back to a specific year or VIN, so measuring the spacing needed is required to get the accurate fit. This is for the 76mm hole centre/centre if you require the 82mm option the Click here.

Sold as a PAIR

The 4WD Shed is an Authorised Stockist of Roadsafe 4WD