Tie Rod End 4pc Kit Toyota Landcruiser 60 Series

inc TE629L TE630L TE631RHD TE632LHD

$245.00

More info.

Make 4 interest-free payments of $61.25



In Stock


Calculate Shipping



1 x Tie Rod End 4pc Kit Toyota Landcruiser 60 Series delivered to , AU


Collect from our Bayswater VIC Store - $0.00
We will call when item is ready for Pick Up

Tie Rod End 4pc Kit to suit Toyota Landcruiser 60 Series

includes TE629L TE630L TE631RHD TE632LHD

Tie Rod Ends are an integral connecting part for your vehicles steering. Having the ability to turn your vehicles wheels is important. Also, usually a RWC item, Tie Rod Ends are a simple replaceable & easily maintained part of your vehicle set up.

Roadsafe 4WD have over the years through rigorous design & testing come up with a much stronger & more developed tie rod end made with more material making it much stronger than the OE ends on your vehicle.

What are some of the signs of it being time to replace the tie rod ends on your vehicle?

  • Uneven tyre wear
  • Noise/Squealing from the front when turning your vehicle
  • Loose feeling when steering
  • Broken tie rods

Preventative maintenance is key! When servicing your vehicle check your tie rods, grease them if needed & replace them if required. Tie rods come in various applications such as "male" or "female" ends & are vehicle & location/rod specific. Please use the table below for information relevant to fitment.

If you are not experienced in servicing or replacing these ends, we always recommend using a professional.

The 4WD Shed is an Authorised Stockist for Roadsafe 4WD.

Part Number Compatible vehicle Application Thread Length
TE632LHD LANDCRUISER 60 70 SERIES LH OUTER MALE with Hole 23x1.5 140mm
TE631RHD LANDCRUISER 60 70 SERIES RH OUTER MALE 23x1.5 86mm
TE630L LANDCRUISER 60 & 70 SERIES LH OUTER      
TE629L LANDCRUISER 60 SERIES RH OUTER      

Steering & Suspension Lubrication requirements.
If a steering or suspension component is supplied/installed with a Grease Nipple it is imperative that the joints are lubricated at services or when exposed to contaminants.
Lack of lubrication will result in part failure. Ongoing lubrication of the part will extend its lifetime in the vehicle.
This is especially important for 4WD components where contaminants might enter the boot or internal assembly when offroad driving. It then may become necessary to flush the contaminants by greasing the part.
Warranty is not valid on parts that have failed due to lack of lubrication, incorrect lubricant used or internal contamination, so it is advised that all joints are adequately lubricated upon installation & at relevant service intervals.

(TE695-4KIT)

SKU TE695-4KIT
Brand RoadSafe 4WD
Shipping Weight 2.9000kg

More From This Category